Installation Tools

Autocad plugin to assist with drawing cabling schematics

Download LA_Schematics

Amplified controller power consumption and thermal dissipation

Nominal voltage :
1/8 max. power - Nominal SPL* IDLE Standby
Amplified controllers
All channels loaded
Quantity Current draw (A) Thermal load (W) Thermal load (BTU/hr) Current draw (A) Thermal load (W) Current draw (A) Thermal load (W)
LA7.16i 4 Ω 0 0 0 0 0 0 0
8 Ω 0 0 0 0 0 0 0
16 Ω 0 0 0 0 0 0 0
LA7.16 4 Ω 0 0 0 0 0 0 0
8 Ω 0 0 0 0 0 0 0
16 Ω 0 0 0 0 0 0 0
LA12X 2.7 Ω 0 0 0 0 0 0 0
4 Ω 0 0 0 0 0 0 0
8 Ω 0 0 0 0 0 0 0
LA8 2.7 or 4 Ω 0 0 0 0 0 0 0
8 Ω 0 0 0 0 0 0 0
LA4X 4 Ω or 8 Ω 0 0 0 0 0 0 0
LA2Xi
4 Ω (in SE or PBTL mode)
8 Ω (in BTL mode)
0 0 0 0 0 0 0
8 Ω (in SE mode)
0 0 0 0 0 0 0
16 Ω (in SE mode)
0 0 0 0 0 0 0
Processors and AVB switch Typical IDLE Standby
LS10 0 0 0 0 0 0 0
P1 0 0 0 0 0 0 0
L-ISA Processor 0 0 0 0 0 0 0
Total 0 0 0 0 0 0 0 0

* An eighth (1/8) of the maximum output power corresponds to a loud music program with a small dynamic range and 9 dB of headroom (IEC standard power rating)

Cable length acceptance criteria based on resulting SPL attenuation*

Speaker Type N° enclosures in parallel Cable gauge (mm²) Cable length (m) SPL Attenuation**

* This tool should be used for installation projects only.

** Averaged over 100 Hz to 10 kHz for full-range products ; Averaged over 40 Hz to 100 Hz for subwoofers